Promo 🌟 Kipsta First Kick, Soccer Ball 👍

Our design teams prioritized the exterior cover’s durability and bounce so that you can practice your first moves.

We designed and developed this ball for young soccer players beginning to play occasionally or in a club environment.

Design

It’s important that young soccer players use a ball that’s the right size, no matter their age, which is why our design teams have developed the First Kick.

Size 3 for kids younger than 8
Size 4 for kids aged 8 to 12
Size 5 for all other ages.
In addition, we have conducted numerous lab tests to guarantee the ball’s ability to withstand every hit.

Circumference

Between 2.4 oz and 2.5 oz (Size 5)
Between 2.2 oz and 2.3 oz (Size 4)
Between 2.1 oz and 2.2 oz (Size 3)

Sphericity

Average measured variation: maximum 2%.
We measure the soccer ball’s sphericity at 16 different points and examine the recorded discrepancies.
If the discrepancy is greater than 2% (FIFA PRO Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce.

Maximum pressure loss

We inflate the ball to the recommended pressure (meaning 0.8 bar).
72 hours later, the ball must not lose more than 15% of its pressure, meaning approx. 0.1 bar. The pressure after 72 hours must, therefore, be at approx. 0.7 bar.
This also means that it is quite normal for a ball to lose pressure after a few days.”

Maximum water absorption

We simulate rainy playing conditions in a lab, leaving the ball to sit in 0.8″ of water on a pivoting support while subjecting it to 250 compressions. By the end of the test, the ball must not have absorbed more than 20% of its weight, or approx. 2.8 oz for the First Kick in size 5.

Bounce

Between 49″ and 61″ with a maximum difference of 4″ between the ball’s highest and lowest bounce. Each ball is dropped 10 times onto a steel plate from a height of 6’6″.

Shape and pressure retention

The most demanding test that this ball is subjected to is the machine shot test.
Withstands up to 2500 shots against an inclined concrete surface at 30 mph at a distance of 8 feet.
At the end of the test, we check:
– the ball’s general state: stitching must withstand this test
– the circumference: must not have increased by more than 0.6″.
– the sphericity: it must not have varied by over 1.5%
– the pressure: loss of pressure must not exceed 0.1 bar.

Weight

Between 14.8 and 15.7 oz. (Size 5)
Between 12.3 and 13.7 oz. (Size 4)
Between 10.9 and 12 oz. (Size 3)

Composition

Outercover : 100.0% Polyvinyl chloride
Bladder : 70.0% Rubber – Natural Rubber – Latex, Bladder : 30.0% Rubber – Butadiene Rubber
Backing : 67.0% Polyester cationic, Backing : 33.0% Acetate

Durability : Resists up to 2500 SHOTS against an inclined flat surface at 30 mph.

Bounce quality : 32 panels with 2 laminated layers combined with a rubber bladder.